Detroit Built American Exotic Dodge SRT Viper Gets Even More Power with K&N Air Intake

69-2528TTK features dual black powder coated aluminum air intake tubes, K&N washable air filters, and Drychargers to maintain functionality of the stock Dodge SRT Viper hood scoop

69-2528TTK features dual black powder coated aluminum air intake tubes, K&N washable air filters, and Drychargers to maintain functionality of the stock Dodge SRT Viper hood scoop

The mighty Dodge Viper took a three year hiatus as Dodge recovered, and reorganized after the financial bailout and eventual sale to Fiat S.p.A. The Viper is no longer found on the Dodge website, as part of the restructure involved rebranding the Viper as a member of the Street & Racing Technology (SRT) high-performance automobile group within the Chrysler Corporation. Sometimes a little rest and relaxation can do wonders, as the Dodge SRT Viper returned as a refined, high-powered, American exotic hand crafted in Detroit Michigan.

K&N replaces the stock 2013 Dodge Viper SRT 8.4L V10 air filter box but maintains compatibility with the original ram hood scoop for a true cold air intake system

K&N replaces the stock 2013 Dodge Viper SRT 8.4L V10 air filter box but maintains compatibility with the original ram hood scoop for a true cold air intake system

The SRT Group managed to massage forty more horsepower from the giant 8.4L V10 engine than the previous generation Dodge Viper. However, one look at the stock air filter box and K&N air intake designers knew there was room for more performance from the 2013 Dodge SRT Viper. Owners seeking this extra boost in power can now install the 69-2528TTK performance air intake system. 69-2528TTK from K&N is precision-engineered to be a simple-to-install performance add-on. The backbone of this intake system is two free-flowing mandrel-bent aluminum air intake tubes which help to minimize restriction, allowing the 8.4L V10 engine to breathe easier. A durable black powder coated finish is applied to the air intake tubes, providing a sleek appearance under the hood that will look great for years to come.

On the dyno, 69-2528TTK produced an estimated additional 13.86 HP at 5,273 rpm and a near equivalent 12.21 lb-ft of torque at 4,579 rpm on an already powerful 2013 Dodge SRT Viper

On the dyno, 69-2528TTK produced an estimated additional 13.86 HP at 5,273 rpm and a near equivalent 12.21 lb-ft of torque at 4,579 rpm on an already powerful 2013 Dodge SRT Viper

K&N equips 69-2528TTK with the dual oversized chrome-top RF-1048 air filters, providing a large surface to help increase airflow while providing outstanding engine protection. The filter is made with K&N’s famous high-flow performance air filter media so it’s a washable and reusable air filter which can go up to 100,000 miles between cleanings, depending on driving conditions. A heat shield shrouds the air filters under the hood, helping to direct air entering the factory ram air scoop into the engine. Cold air intake 69-2528TTK includes two K&N Drycharger pre-filter wraps that will help maintain a dry air filter and keep insects from getting stuck in the filter pleats.

All of the design features of the 69-2528TTK performance air intake system work in perfect harmony to deliver increased performance. On the dyno, 69-2528TTK produced an estimated additional 13.86 HP at 5,273 rpm and a near equivalent 12.21 lb-ft of torque at 4,579 rpm on an already powerful stock 2013 Dodge SRT Viper.

The 69-2528TTK performance air intake system is an excellent upgrade for your 2013 Dodge SRT Viper or 2013 Viper GTS Coupe powered by an 8.4L V10. With simple to follow instructions and no need to make any other modifications to the vehicle, you’ll be on the road in approximately 90 minutes with more horsepower under your right foot.

If all that weren’t enough, K&N backs the 69-2528TTK with the industry-leading K&N Million Mile Limited Warranty. If you’re looking to take your 2013 Dodge SRT Viper or 2013 Viper GTS Coupe to the next level of competition or just to wow your friends, look no further than the 69-2528TTK Typhoon air intake system.

To find additional K&N products for your 2013 Dodge SRT Viper 8.4L V10 please use the K&N search by vehicle tool.

clear
 
K&N PRODUCT SEARCH K&N Filters Logo WHERE TO BUY K&N