K&N Marine Flame Arrestors & Accessories Boat Applications
K&N Flame Arrestors for Boats
- Marine approved per SAE J1928 standard
- Designed to increase horsepower & torque
- Washable and reusable air filter
Due to the differences in engine compartment designs, and accessories supplied by those manufactures, clearances may vary from boat to boat. The applications listed are to be used as a reference guide only. Make sure to double check all the measurements before ordering by using the checklist below. If you wish to increase or decrease the size of the filter, see Universal 3-Piece assemblies below. (K&N Marine Flame Arrestor 59-1195 shown in picture)
IMPORTANT: DID YOU CHECK THE FOLLOWING?
- Diameter clearance around the existing flame arrestor. Can the flame arrestor diameter be increased?
- Height restriction, due to hatch clearance or any other obstruction. Can the flame arrestor’s height be increased?
- Do any vent lines connected to existing flame arrestor. If there are vent lines attached, measure inside diameter of vent line and order appropriate vent hose kit below.
- For multiple carburetor application, check center to center measurements ensuring enough space for two flame arrestors.
- Check diameter of carburetor.
K&N Marine Flame Arrestors for Indmar Boats
Indmar 5.7L Malibu Vortec 4 bbl 5.7L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 3.75" | 2" | 59-3264 | 1 |
Indmar 5.7l Vortec Carb 4 bbl 5.7L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 3.75" | 2" | 59-3264 | 1 |
Indmar 5.7L Vortec TBI 5.7L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 3.75" | 2" | 59-3264 | 1,3 |
Indmar 7.4L 4 bbl 7.4L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 3.75" | 2" | 59-3264 | 1 |
Indmar 7.4L MPI 7.4L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| N/A | N/A | 59-5020 | |
Indmar 8.1L 4 bbl 8.1L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.50" | 2.75" | 59-3364 | 1,2 |
Indmar 8.1L PFI 8.1L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| N/A | N/A | 59-5020 | |
K&N Marine Flame Arrestors for Mercury Boats
Mercury 3.0L 2 bbl 3.0L L4
| Flange | Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 5.125 | 3.75" | 2" | 59-3264 | 1 |
| 3.063 | 3.75" | 2" | 59-3262 | 1 |
| 3.063 | 3.75" | 2.875" | 59-3362 | 1 |
Mercury 4.3L 2 bbl 4.3L V6
| Flange | Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 5.125" | 3.75" | 2" | 59-3264 | 1 |
| 3.063" | 3.75" | 2" | 59-3262 | 1 |
| 3.063" | 3.75" | 2.875" | 59-3362 | 1 |
Mercury 4.3LH 4 bbl 4.3L V6
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 3.75" | 2" | 59-3264 | 1 |
Mercury 4.3L EFI TBI 4.3L V6
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 3.75" | 2" | 59-3264 | 1,3 |
Mercury 5.0L 2 bbl 5.0L V8
| Flange | Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 5.125" | 4.50" | 2.75" | 59-3364 | 1,2 |
| 3.063" | 4.50" | 2" | 59-3262 | 1,2 |
| 3.063" | 4.50" | 2.875" | 59-3362 | 1,2 |
Mercury 5.0L EFI TBI 5.0L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.50" | 2.75" | 59-3364 | 1,2,4 |
Mercury 5.7L 2 bbl 5.7L V8
| Flange | Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 5.125" | 4.50" | 2.75" | 59-3364 | 1,2 |
| 3.063" | 3.75" | 2" | 59-3262 | 1,2 |
| 3.063" | 4.50" | 2.875" | 59-3362 | 1,2 |
Mercury 5.7L SKI 2 bbl 5.7L V8
| Flange | Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 5.125" | 4.50" | 2.75" | 59-3364 | 1,2 |
| 3.063" | 3.75" | 2" | 59-3262 | 1,2 |
| 3.063" | 4.50" | 2.875" | 59-3362 | 1,2 |
Mercury 5.7L EFI TBI 5.7L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.50" | 2.75" | 59-3364 | 1,2,4 |
1998, 1999 & 2000 Mercury Mercruiser 7.4L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 6.625" | 6" | 59-5004 | |
Mercury Early Mercruiser MPI 3V Pulley 454 MAG
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.375" | 4" | 59-4541 | 5 |
Mercury Early Mercruiser MPI 3V Pulley 502 MAG
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.375" | 4" | 59-4541 | 5 |
Mercury Late MPI Serpentine Belt 454 MAG
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.375" | 4" | 59-4542 | 6 |
Mercury Late MPI Serpentine Belt 502 MAG
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.375" | 4" | 59-4542 | 6 |
Mercury 496 MPI 8.1L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.375" | 4" | 59-5005 | |
Mercury 496 HO & Mag MPI 8.1L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.375" | 4" | 59-5005 | |
Mercury HP 500 4 bbl 8.2L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 6.75" | 5" | 59-3370 | 1,2 |
Mercury HP 500 MPI 8.2L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.375" | 4" | 59-5020 | |
K&N Marine Flame Arrestors for Volvo Penta SX Series Boats
Volvo Penta SX 3.0 GS 2 bbl 3.0L L4
| Flange | Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 5.125" | 3.75" | 2" | 59-3264 | 1 |
| 3.063" | 3.75" | 2" | 59-3262 | 1 |
| 3.063" | 3.75" | 2.875" | 59-3362 | 1 |
Volvo Penta SX 4.3GL 2 bbl 4.3L V6
| Flange | Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 5.125" | 3.75" | 2" | 59-3264 | 1 |
| 3.063" | 3.75" | 2" | 59-3262 | 1 |
| 3.063" | 3.75" | 2.875" | 59-3362 | 1 |
Volvo Penta SX 4.3L Gi EFI-TBI 4.3L V6
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 3.75" | 2" | 59-3264 | 1,3 |
Volvo Penta SX 5.0GL 2 bbl 5.0L V8
| Flange | Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 5.125" | 4.50" | 2.75" | 59-3364 | 1,2 |
| 3.063" | 4.50" | 2" | 59-3262 | 1,2 |
| 3.063" | 4.50" | 2.875" | 59-3362 | 1,2 |
Volvo Penta SX 5.0L Gi EFI-TBI 5.0L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.50" | 2.75" | 59-3364 | 1,2,4 |
Volvo Penta SX 5.7 GS 2 bbl 5.7L V8
| Flange | Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 5.125" | 4.50" | 2.75" | 59-3364 | 1,2 |
| 3.063" | 4.50" | 2" | 59-3262 | 1,2 |
| 3.063" | 4.50" | 2.875" | 59-3362 | 1,2 |
Volvo Penta SX 5.7L Gsi EFI-TBI 5.7L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.50" | 2.75" | 59-3364 | 1,2,4 |
Volvo Penta SX 7.4 Gi MPI 7.4L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.50" | 2.75" | 59-3364 | 1,2,4 |
K&N Marine Flame Arrestors for Volvo Penta Duoprop Series Boats
Volvo Penta Duoprop 4.3GL 2 bbl 4.3L V6
| Flange | Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 5.125" | 3.75" | 2" | 59-3264 | 1 |
| 3.063" | 3.75" | 2" | 59-3262 | 1 |
| 3.063" | 3.75" | 2.875" | 59-3362 | 1 |
Volvo Penta Duoprop 4.3L Gi EFI-TBI 4.3L V6
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 3.75" | 2" | 59-3264 | 1,4 |
Volvo Penta Duoprop 5.0GL 2 bbl 5.0L V8
| Flange | Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 5.125" | 4.50" | 2.75" | 59-3364 | 1,2 |
| 3.063" | 3.75" | 2" | 59-3262 | 1,2 |
| 3.063" | 4.50" | 2.875" | 59-3362 | 1,2 |
Volvo Penta Duoprop 5.0L Gi EFI-TBI 5.0L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.50" | 2.75" | 59-3364 | 1,2,4 |
Volvo Penta Duoprop 5.7 GS 2 bbl 5.7L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.50" | 2.75" | 59-3364 | 1,2 |
Volvo Penta Duoprop 5.7L Gsi EFI-TBI 5.7L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.50" | 2.75" | 59-3364 | 1,2,4 |
Volvo Penta Duoprop 7.4 Gi EFI-MPI 7.4L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.50" | 2.75" | 59-3364 | 1,2,4 |
Volvo Penta Duoprop 7.4 Gsi EFI-MPI 7.4L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.50" | 2.75" | 59-3364 | 1,2,4 |
Volvo Penta Duoprop 8.1L MPI EFI-MPI 8.1L V8
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.50" | 2.75" | 59-3364 | 1,2,4 |
K&N Marine Flame Arrestors for Volvo Penta High-End Series Boats
Volvo Penta DPX 385 EFI-MPI 7.4L/454
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.50" | 2.75" | 59-3364 | 1,2,4 |
Volvo Penta DPX 415 EFI-MPI 8.2L/502
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.50" | 2.75" | 59-3364 | 1,2,4 |
Volvo Penta DPX 500 EFI-MPI 8.2L/502
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.50" | 2.75" | 59-3364 | 1,2,4 |
Volvo Penta DPX 600 EFI-MPI 8.8L/540
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.50" | 2.75" | 59-3364 | 1,2,4 |
K&N Marine Flame Arrestor for Volvo Penta Inboard 7.4Gi EFI-MPI 7.4L/454 Boats
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.50" | 2.75" | 59-3364 | 1,2,4 |
Flame Arrestor for Volvo Penta Platinum 7.4Gi EFI-MPI 7.4L/454 Boats
| Total Height | Element Height | K&N Flame Arrestor | Footnotes |
| 4.50" | 2.75" | 59-3364 | 1,2,4 |
Footnotes for above applications: 1) May increase size as needed. 2) May decrease size as needed. 5) Kit includes adapter Part# 85-8837 and flame arrestor Part# 59-5005. 6) Kit includes adapter Part# 85-8837 and flame arrestor Part# 59-5006. 7) Single Stud, 3-7/8" throttle body 8) 3 Studs, 3-5/8" throttle body.
K&N Flame Arrestor Adapter 85-8837
This oval, four bolt flame arrestor adapter is used for early model Mercruiser MPI with a 3V Pulley and late model MPI with a serpentine belt.
Universal 14 Inch 3-Piece Air Filter Assembly
| Flange Diameter | Element Height | Total Height | Velocity Stack | K&N Flame Arrestor |
| 5-1/8" | 2.25" | 3.87" | No | 59-3214 |
| 5-1/8" | 3.0" | 4.62" | No | 59-3314 |
| 5-1/8" | 4.0" | 5.62" | No | 59-3414 |
Universal 9 Inch 3-Piece Air Filter Assembly
K&N Flame Arrestor 59-5004 for 98-00 Mercruiser 7.4L
K&N Flame Arrestor 59-3364 for Carb Applications
K&N Flame Arrestor 59-5005 for Mercruiser 496 HO
K&N Flame Arrestor 59-5020 for Mercruiser HP 500
K&N Flame Arrestor Vent Hose Adapter for 3 Piece Assembly
K&N Flame Arrestor 59-4541 for Mercruiser 454/502 Magnum
Marine Vent Hose Adapters (Trimming for correct height may be required)
K&N Oval Clamp-On Marine Flame Arrestors
2.93" x 4.75" Flange
| Length | Width | Height | Notes | K&N Flame Arrestor |
| 6.5" | 4.75" | 5.62" | GM TPI | 59-5000 |
| 8.62" | 4.5" | 3.18" | GM LT-1 No Vent | 59-5020 |
| 8.62" | 4.5" | 3.18" | GM LT 5/8" Vents(2) | 59-5021 |
| 8.62" | 4.5" | 3.18" | GM LT-1 5/8" Vent | 59-5019 |
| 8.62" | 5.25" | 5.5" | GM 454 TPI | 59-5050 |
3.44" x 5.44" Flange
| Length | Width | Height | K&N Flame Arrestor |
| 8.5" | 5.06" | 5" | 59-5007 |
K&N Round Clamp-On Marine Flame Arrestors
3.75" Flange
| Length | Width | Height | Notes | K&N Flame Arrestor |
| 9.5" x 4.625" B | 8.5" x 3.75" T | 4" | 454/502 MAG | 59-5005 |
| 9.5" x 4.625" B | 8.5" x 3.75" T | 4" | 454/502 MAG 1/2" Vent | 59-5006 |
5" Flange
| Length | Width | Height | Notes | K&N Flame Arrestor |
| 5" | 4.5" x 3.25" | 5" | | 59-5003 |
3.625" Flange
| Length | Width | Height | Notes | K&N Flame Arrestor |
| 5.75" | 3" | 6" | | 59-5004 |
| 5.75" | 3" | 6" | 96-97 GM 2) 3/4" Vents | 59-5001 |
3.75" Flange
| Length | Width | Height | Notes | K&N Flame Arrestor |
| 9.31" | 4.5" | 3" | 96-97 GM (2) 5/8" Vents | 59-5022 |
| 9.31" | 4.5" | 3" | 96-97 GM (2) 3/4" Vents | 59-5023 |
| 9.31" | 4.5" | 3" | 96-97 GM | 59-5030 |
| 9.31 | 4.5" | 3" | 96-97 GM 5/8" Vent | 59-5010 |
| 5.25" | 3" | 6" | | 59-2030 |
4" Flange
| Length | Width | Height | Notes | K&N Flame Arrestor |
| 5.38" | 4.5 x 3.25" | 5" | | 59-5002 |