Fourteen & Sixteen Inch Custom Assemblies

Fourteen Inch Drop Base Air Filters - Chrome

Fourteen Inch Drop Base Air Filters - Chrome

Race ready low profile air cleaner. Drops filter 7/8" or 1-1/4" below carburetor flange. 5-1/8" flange fits all popular 4 barrel carburetors. Four element heights to fit a wide variety of applications. Note: 7/8" drop will fit carburetors with electric choke mechanisms.

1-1/4" DROP BASE

Neck
Flange
Element
Height
K&N P/N
Element
Foot
Note
K&N P/N
Complete Assembly
Total**
Height
5-1/8" 3" E-1650 2 60-1280* 2.75"
5-1/8" 4" E-3750 2 60-1290* 3.75"
5-1/8" 5" E-3760 2 60-1300* 4.75"
5-1/8" 6" E-3770 2 60-1310* 5.75"

7/8" DROP BASE

Neck
Flange
Element
Height
K&N P/N
Element
Foot
Note
K&N P/N
Complete Assembly
Total**
Height
5-1/8" 3" E-1650 2 60-1430 3.12"
5-1/8" 4" E-3750 2 60-1440 4.12"
5-1/8" 5" E-3760 2 60-1450 5.12"
5-1/8" 6" E-3770 2 60-1460 6.12"

Fourteen Inch Air Filters - Chrome

Fourteen Inch Air Filters - Chrome

Popular 14" chrome racing style assembly. Raises element 9/16" above carburetor flange. 5-1/8" flange fits all popular 4 barrel carburetors. Four element heights to fit a wide variety of applications. Will clear HEI distributors.

Neck
Flange
Element
Height
K&N P/N
Element
Foot
Note
K&N P/N
Complete Assembly
Total**
Height
5-1/8" 2-5/16" E-3740 1 60-1263 3.87"
5-1/8" 3" E-1650 1 60-1264 4.62"
5-1/8" 4" E-3750 1 60-1260 5.62"
5-1/8" 5" E-3760 1 60-1270 6.62"

14 & 16 Inch Dominator Air Filters - Chrome

14" DOMINATOR AIR FILTER

K&N's 14" diameter race-ready air cleaners can flow the amount of air required for the Holley Dominator carburetors. 7-5/16" flange base has a 3/4" rise velocity stack.

Neck
Flange
Element
Height
K&N P/N
Element
Filter
OD
Foot
Note
K&N P/N
Complete Assembly
Total**
Height
7-5/16" 4" E-3750 14" 5 60-1235 5.50"
7-5/16" 5" E-3760 14" 5 60-1245 6.50"
7-5/16" 6" E-3770 14" 5 60-1255 7.50"

16" DOMINATOR AIR FILTER

This 16 inch Dominator Assembly flows up to 1,150 CFM (cubic feet per minute)

Dominator Air Filter Assembly 60-1640


Neck
Flange
Element
Height
K&N P/N
Element
Filter
OD
Foot
Note
K&N P/N
Complete Assembly
Total**
Height
7 5/16" 3 1/2" E-3804 16" 7 60-1640 3.25"
7 5/16" 4 1/16" E-3806 16" 7 60-1641 3.813"
7 5/16" 4 1/2" E-3808 16" 7 60-1642 4.25"

Fourteen Inch Triangle Air Filter - Chrome

Fourteen Inch Triangle Air Filter - Chrome

K&N's new custom chrome triangle assembly is designed to make any engine compartment come to life. This triangle assembly comes with a 3" high K&N Filtercharger®, has smooth radius corners and fits most carburetors with 5-1/8" flange.

Neck
Flange
Element
Height
K&N P/N
Element
Filter
OD
Foot
Note
K&N P/N
Complete Assembly
Total**
Height
5-1/8" 3" E-3737 14" - 60-1470 3.62"

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

FOOTNOTES 1) Includes vent kit 2) Vent kit available, P/N 85-1190 3) 1/2" vent tube on base 4) 3/4" vent tube on base 5) Top is chrome & base is hi-temp nylon 6) Stainless Steel top & chrome base. 7) Base and top are chrome plated.   * Will not fit Edelbrock carbs with electric choke. ** Total Height = minimum clearance required above carburetor flange.

Chat Now Chat Now